224.300 Repeater coming soon

Thanks to a donation from KF4EOK / Daniel Lewis

• #1: The output frequency is 224.300 MHz

  224.300 is the frequency that the repeater transmits on. Knowing this you will want to program your receiver to receive on 224.300 MHz

• #2:The offset is -1.600

  Knowing the offset is minus -1.600 you will want to set your transmit frequency to 222.700 MHz

• #3: The PL Tone is 127.3

  Knowing the transmit tone is required to access the repeater you will need to set it to 127.3

  You can also set the tone squelch to 127.3 on the receive side if you would like but this is not necessary.

• #4: This will be a 1.25 meter repeater and will be a split site repeater with a voter and several remote receivers.

  This Repeater is located, well for now it is a top secret project project of W4RNG

  This sites consist of a power supply, receiver, transmitter, amplifier? Allstar controller?, echolink? coax, voter and antenna.

• #5: Yes you read that right, the repeater may have Allstar and Echolink

• #6: This repeater will be linked with the 146.760 W4RNG repeater so it will have extended range and coverage.

  Having the repeater linked will give others without 220 rigs a chance to experience 220. It will also have a better chance to find someone to have a QSO with 220.