444.550 MMDVM Repeater

• #1: The output frequency is 444.550 MHz

  444.550 is the frequency that the repeater transmits on. Knowing this you will want to program your receiver to receive on 444.550 MHz

• #2:The offset is +5.000

  Knowing the offset is plus 5.000 you will want to set your transmit frequency to 449.550 MHz

• #3: The PL Tone is 127.3

  The transmit tone required for FM is 127.3 to access the repeater you will need to set it to 127.3

  You should also set the tone squelch to 127.3 on FM for the receive side so that you will not hear the digital noise if you do not have a digital radio.

  On the DMR side: The DMR color code is 1 and the repeater id is 311285

  On the D-Star side the repeater defaults to REF030 C

• #4 This repeater is located at KF4EOK's QTH and has a limited range to near the area of Beach Blvd. and Southside Blvd. The base of the Commscope DB420 antenna is only at 52 foot above ground level.

• #5: This is a MMDVM (Multi Mode Digital Voice Modem) repeater which consist of a DR-1X Yaesu repeater, Repeater builder Builder Raspberry Pi3 / STM32_DVM Combo, BPBR duplexers, and a Commscope DB420 antenna.

  This repeater will do multipliable modes. It is currently set to do FM, DMR, D-Star and System Fusion C4FM. The repeater can be configured to also do M17, P25, NXDN, YSF2DMR, YSF2P25, DMF2YSF, DMR2NXDN AND POCSAG. You are welcome to experiment with the repeater and try the different modes. If you would like us to turn on other modes like P25 use the contact us form link in the footer or call us and let us know what you would like to see turned on. Lets make this hobby fun again.