53.330 6 Meter Repeater

• #1: The output frequency is 53.330 MHz

  53.330 is the frequency that the repeater transmits on. Knowing this you will want to program your receiver to receive on 53.330 MHz

• #2:The offset is -1.000

  Knowing the offset is minus 1.000 you will want to set your transmit frequency to 52.330 MHz

• #3: The PL Tone is 127.3

  Knowing the transmit tone is required to access the repeater you will need to set it to 127.3

  You can also set the tone squelch to 127.3 on the receive side if you would like.

• #4: This is a 6 meter repeater.

  This Repeater is located downtown Jacksonville, FL.

  This sites consist of a power supply, receiver, transmitter, CAT 1000 controller, battery backup, preamp, coax, duplexers and antenna.